Concrete Driveways & Flatwork in Central Minnesota

Concrete that lasts in Minnesota is mostly a base-prep story. The cold doesn't care how nice your finish trowel was — if the subgrade wasn't compacted or the gravel was too thin, the slab will crack, settle, and spall within a few winters. We build flatwork the right way, every time: proper excavation, properly compacted base, the right reinforcement, the right concrete mix, and a finish that's appropriate for the application.

Driveways are the biggest investment we pour. A standard residential driveway runs 4-6 inches of concrete over 4-6 inches of compacted Class 5 base, with rebar or wire mesh through the slab and clean control joints saw-cut at the right spacing. We slope every driveway to drain, tie it cleanly into the apron and garage floor, and use an air-entrained mix that's rated for freeze/thaw exposure.

Beyond driveways we pour sidewalks, walk-up steps, garage and shed pads, AC pads, hot tub pads, garbage corrals, footings for retaining walls and pergolas, and stamped concrete patios. Each one gets the base, the reinforcement, and the joints sized to the slab. We don't carry the same playbook from job to job — pad thickness and rebar layout for a 24x30 garage floor are different than for a 4-foot walkway.

Finish options include standard broom finish (best traction and grip in winter), exposed aggregate, stamped concrete in dozens of patterns, and integral color. Stamped and colored work needs a sealer maintenance cycle in Minnesota — we'll walk you through what each finish actually looks like five winters in.